Dell PowerConnect 6024F Command Line Interface Reference Manual page 332

The following table describes the fields shown in the display:
Field
Interface
Received Bad Packets
Received Bad Routes
Sent Updates
The following example displays IP RIP peer information.
Console# show ip rip peer
Address
----------
176.16.1.1
192.168.1.1
The following table describes the fields shown in the display:
Field
Address
Route Tag
Last Update
Version
Received Bad Packets
Received Bad Routes
332
RIP Commands
Description
The interface IP Address.
The number of RIP response packets received by the RIP process which
were subsequently discarded for any reason (for example, a version 0
packet, or an unknown command type).
The number of routes, in valid RIP packets, which were ignored for any
reason (for example, unknown address family, or invalid metric).
The number of triggered RIP updates actually sent on this interface. This
explicitly does NOT include full updates sent containing new information.
Route Last Update Version Received
Tag
------ ------------------- ------------ ----------
10:00:17
10:00:27
Description
The peer IP Address.
The value in the Routing Domain field in RIP packets received from the
peer.
Time left since the most recent RIP update was received from this system.
The RIP version number in the header of the last RIP packet received.
The number of RIP response packets from this peer discarded as invalid.
The number of routes from this peer that were ignored because the entry
format was invalid.
Received
Bad Packets Bad Routes
20 1
20 0