Show Keys - Dell PowerConnect 6024F Command Line Interface Reference Manual

show keys

The show keys privileged EXEC command displays key information.
Syntax
show keys [key-id]
• key-id—Identification number of an authentication key on a key chain. (Range: 1 - 255)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays key-chain information.
Router# show keys
key 1
accept: 13:30:00 Jan 25 2005
send: 13:30:00 Jan 25 2005
key 2
accept: 13:30:00 Jan 25 2005
send: 14:00:00 Jan 25 2005
key 3
accept: 14:30:00 Jan 25 2005
send: 15:00:00 Jan 25 2005
196
IP Routing Protocol-Independent Commands
forever
forever
until 15:30:00 Jan 25 2005
until 15:00:00 Jan 25 2005
until 16:30:00 Jan 25 2005
until 16:00:00 Jan 25 2005