Ip Igmp Snooping Mrouter-Time-Out - Dell PowerConnect 6024F Command Line Interface Reference Manual

Syntax
ip igmp snooping host-time-out time-out
no ip igmp snooping host-time-out
time-out—Host timeout in seconds. (Range: 1 - 2147483647)
•
Default Configuration
The default host-time-out is 260 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
The timeout should be at least greater than 2*query_interval+max_response_time of the
IGMP router.
Example
The following example configures the host timeout to 300 seconds.
Console (config)# interface vlan 2
Console (config-if)# ip igmp snooping host-time-out 300

ip igmp snooping mrouter-time-out

The ip igmp snooping mrouter-time-out interface configuration command configures the
mrouter-time-out. The mrouter-time-out command is used for setting the aging-out time after
Multicast router ports are automatically learned. To configure the default mrouter-time-out, use
the no form of this command.
Syntax
ip igmp snooping mrouter-time-out time-out
no ip igmp snooping mrouter-time-out
• time-out—mrouter timeout in seconds (Range: 1 - 2147483647)
Default Configuration
The default value is 300 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
IGMP Snooping Commands
177