User Guidelines
The packet refers to a threshold by the conformance level. Weighted round robin queues
should be defined on the interface.
A weight between 6 and 255 may be specified. A weight of 0 may also be specified for all
queues except queue 8. Note that specifying a weight of 0 is not recommended because it
closes the queue.
Example
The following example sets queue weights as follows:
•
Queue 1—6
•
Queue 2—6
•
Queue 3—6
•
Queue 4—6
•
Queue 5—6
•
Queue 6—6
•
Queue 7—6
•
Queue 8—6
Console (config-if)# wrr-queue bandwidth 6 6 6 6 6 6 6 6
wrr-queue
The wrr-queue interface configuration command defines the wrr-queue mechanism on an egress
queue. Use the no form of the command to define the default thresholds.
Syntax
wrr-queue {tail-drop}
no wrr-queue
•
tail-drop—Tail-drop mechanism.
Default Configuration
The system default is tail-drop mechanism with 100% for all thresholds.
Command Mode
Interface Configuration mode.
User Guidelines
There are no user guidelines for this command.
289
QoS Commands