Dell PowerConnect 6024F Command Line Interface Reference Manual page 351
Command
line interface (cli) guide (.htm)
Hide thumbs
Also See for PowerConnect 6024F:
- User manual (474 pages) ,
- Getting started manual (66 pages) ,
- Getting started manual (154 pages)
Table of Contents
Advertisement
no snmp-server trap authentication
Default Configuration
Traps are enabled by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the command to enable authentication failed SNMP traps.
Console (config)# snmp-server trap authentication
snmp-server set
The snmp-server set global configuration command sets SNMP MIB value by the CLI.
Syntax
snmp-server set variable-name name1 value1 [name2 value2 ...]
•
variable-name—MIB variable name.
•
name value...—List of name and value pairs. In case of scalar MIBs there is only a single
pair of name values. In case of entry in a table the first pairs are the indexes, followed by
one or more fields.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Although the CLI can set any required configuration, there might be a situation where a
SNMP user sets a MIB variable that does not have an equivalent command. In order to
generate configuration files that support those situations, the snmp-server set command is
used.
This
command is context sensitive.
351
SNMP Commands
Advertisement
Table of Contents
