Show Sntp Configuration - Dell PowerConnect 6024F Command Line Interface Reference Manual

show sntp configuration

The show sntp configuration privileged EXEC command shows the configuration of the Simple
Network Time Protocol (SNTP).
Syntax
show sntp configuration
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the current SNTP configuration of the device.
Console# show sntp configuration
Polling interval: 180 seconds
No MD5 Authentication keys.
Authentication is not required for synchronization.
No trusted keys.
Unicast Clients Polling: Disabled
Server
-----------
42.52.3.123
212.12.34.23
OOB SNTP servers:
Server
-----------
67.1.1.2
112
Clock
Polling Encryption Key
-------- -----------------
Disabled Disabled
Enabled Disabled
Polling Encryption Key
-------- -----------------
Disabled Disabled