Dhcp Relay Commands; Ip Dhcp Relay Enable; Ip Dhcp Relay Address - Dell PowerConnect 6024F Command Line Interface Reference Manual
Command
line interface (cli) guide (.htm)
Hide thumbs
Also See for PowerConnect 6024F:
- User manual (474 pages) ,
- Getting started manual (66 pages) ,
- Getting started manual (154 pages)
Table of Contents
Advertisement
DHCP Relay Commands
ip dhcp relay enable
The ip dhcp relay enable global configuration command enables Dynamic Host Configuration
Protocol (DHCP) relay agent features on the router. To disable the relay agent features, use the no
form of this command.
Syntax
ip dhcp relay enable
no ip dhcp relay enable
Default Configuration
DHCP is disabled on the router.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables DHCP services on the DHCP Server.
Console(config)# ip dhcp relay enable
ip dhcp relay address
The ip dhcp relay address global configuration command defines the DHCP servers available for
the DHCP relay. To remove a server from the available DHCP servers list, use the no form of this
command.
Syntax
ip dhcp relay address ip-address
no dhcp relay address [ip-address]
•
ip-address—DHCP server IP address. Up to 8 servers can be defined.
Default Configuration
No server is defined.
DHCP Relay Commands
115
Advertisement
Table of Contents
