Syntax
show vrrp configuration [ethernet interface-number | vlan vlan-id | port-channel number]
•
ethernet interface-number—Ethernet port number.
•
vlan vlan-id—VLAN number.
•
port-channel number—Port-channel number.
Default Configuration
There are no user guidelines for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the VRRP configuration.
Console# show vrrp configuration
Interface VRID
State
--------- ---- --------------- -------- ----- ---- ------- --------------
g1
down
The following table describes the significant fields shown in the display:
Field
Interface
VRID
Address
Priority
Timer
Auth
Preempt
Source-ip
State
474
VRRP Commands
Address
10
1.1.1.99
Description
Interface type and number.
Virtual Router Identifier.
Virtual Router associated address.
Priority used for the virtual router master election.
The time interval, in seconds, between sending advertisement messages.
Displays if authentication is used.
Displays whether a higher priority virtual router preempts a lower priority
master.
Source IP address used in the VRRP messages.
Displays if the virtual router is up or down.
Priority Timer Auth Preempt
100
1
No
Source-ip
Yes
0.0.0.0