If no host-specific timeout, key or source values are specified, the global values apply to each
host.
To define a TACACS+ server on the out-of-band port, use the out-of-band IP address format:
oob/ip-address.
Example
The following example specifies a TACACS+ host:
Console(config)# tacacs-server host 172.16.1.1
tacacs-server key
The tacacs-server key global configuration command sets the authentication and encryption key for
all TACACS+ communications between the device and the TACACS+ daemon. To disable the
key, use the no form of this command.
Syntax
tacacs-server key [key-string]
no tacacs-server key
•
key-string—The authentication and encryption key for all TACACS communications
between the router and the TACACS+ server. This key must match the encryption used
on the TACACS+ daemon (Range: 0-128).
Default Configuration
The default is an empty string.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the authentication encryption key:
Console(config)# tacacs-server key dell-s
tacacs-server source-ip
The tacacs-server source-ip global configuration command specifies the source IP address used for
communication with TACACS+ servers. To return to the default, use the no form of this
command.
440
TACACS+ Commands