Show Bridge Address-Table Static - Dell PowerConnect 5324 Command Line Interface Reference Manual

Console# show bridge address-table
Aging time is 300 sec
vlan mac address
---- -----------
1 00:60:70:4C:73:FF
1 00:60:70:8C:73:FF
200 00:10:0D:48:37:FF
8 00:10:0D:48:37:FF

show bridge address-table static

The show bridge address-table static Privileged EXEC mode command displays statically created
entries in the bridge-forwarding database.
Syntax
show bridge address-table static [vlan vlan] [ethernet interface | port-channel port-channel-
number]
• vlan—Specific valid VLAN, such as VLAN 1.
• interface—A valid Ethernet port.
• port-channel-number—A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
• There are no user guidelines for this command.
Example
In this example, all static entries in the bridge-forwarding database are displayed.
port type
---- ----
g8 dynamic
g7 dynamic
g4 static
g2 dynamic
Address Table Commands
87