Show Qos Interface - Dell PowerConnect 6024F Command Line Interface Reference Manual
Command
line interface (cli) guide (.htm)
Hide thumbs
Also See for PowerConnect 6024F:
- User manual (474 pages) ,
- Getting started manual (66 pages) ,
- Getting started manual (154 pages)
Table of Contents
Advertisement
Example
The following example defines the wrr-queue mechanism on an egress queue to tail-drop.
Console (config)# interface ethernet g5
Console (config-if)# wrr-queue tail-drop
show qos interface
The show qos interface user EXEC command displays interface QoS data.
Syntax
show qos interface [ethernet interface-number | vlan vlan-id | port-channel number] [buffers
| queuing | policers | shapers]
•
ethernet interface-number—Ethernet port number.
•
vlan vlan-id—VLAN number.
•
port-channel number—Port-channel.
•
buffers—Displays buffer setting for the interface queues. For gigabit Ethernet interfaces,
the queue depth for each of the 8 queues and the thresholds for the WRED/Tail Drop are
displayed. For 10/100 interfaces the minimum reserved settings are displayed.
•
queuing—Displays the queue strategy (WRR or EF), the weight for WRR queues, the
CoS to queue map and the EF priority.
•
shapers—Displays the specified interface shaper and the shaper for the queue on the
specified interface.
•
policers—Displays all the policers configured for this interface, their setting, and the
number of policers currently unused.
Default Configuration
For VLAN interface only the policers option is relevant.
If no keyword is specified with the show qos interface command, the port QoS mode, default
CoS value, DSCP-to-DSCP-mutation map (if any) attached to the port, and policy map (if
any) attached to the interface are displayed. If a specific interface is not specified, the
information for all interfaces is displayed.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
290
QoS Commands
Advertisement
Table of Contents
