Using The Cli; Cli Command Modes - Dell PowerConnect 6024F Command Line Interface Reference Manual

Command line interface (cli) guide (.htm)
Hide thumbs Also See for PowerConnect 6024F:
Table of Contents

Advertisement

Using the CLI

This chapter describes how to start using the CLI and describes implemented command editing
features to assist in using the CLI.

CLI Command Modes

Introduction
To assist in configuring devices, the CLI command-line interface is divided into different
command modes. Each command mode has its own set of specific commands. Entering a question
mark "?" at the system prompt (console prompt) displays a list of commands available for that
particular command mode.
From each mode a specific command is used to navigate from one command mode to another. The
standard order to access the modes is as follows: User EXEC mode, Privileged EXEC mode, Global
Configuration mode, and Interface Configuration mode. The following figure illustrates the
command mode access path.
User EXEC Mode
Prompt: console>
Enable
Global ConfigurationMode
Layer2
Interface Ethernet
Prompt: console(config-if )#
Interface VLAN
Prompt: console(config-if )#
Interface Port Channel
Prompt: console(config-if )#
Interface Range Ethernet
Prompt: console(config-if )#
Interface Range VLAN
Prompt: console(config-if )#
Interface Range Port Channel
Prompt: console(config-if )#
VLAN Database
Prompt: console(config-vlan)#
MST
Prompt: console(config-mst)#
Password
Prompt: console(config)#
Layer 3
Interface IP
Prompt: console(config-ip)#
OSPF Virtual Link
Prompt: console(config-ip)#
Prompt: console(config-pmap)#
Prompt: console(config-pmap-c)#
Privileged Mode
Prompt: console#
Management
Interface OOB Ethernet
Prompt: console(config-oob)#
Prompt: console(config-ip-al)#
Management Access-List
Prompt: console(config-macl)#
Prompt: console(config-mac-al)#
Line
Prompt: console(config-line)#
Prompt: console(config-cmap)#
Key
Prompt: console(config-key)#
Prompt: console(config-keychain)#
Policy Map
Prompt: console(config-pubkey-
Interface OOB Ethernet
Prompt: console(config-pubkey-
IP Access List
MAC List
Class Map
Key Chain
SSH Public Key Chain
chain)#
Interface OOB Ethernet
key)#
Using the CLI
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect 6024

Table of Contents