Dell PowerConnect 6024F Command Line Interface Reference Manual page 276

The following example displays detailed optical transceiver diagnostics.
Console# show fiber-ports transceiver detailed
Port
----
g1
g2
g3
Temp – Internally measured transceiver temperature.
Voltage - Internally measured supply voltage.
Current – Measured TX bias current.
Output Power – Measured TX output power.
Input Power – Measured RX
Tx Fault – Transmitter fault
LOS – Loss of signal
Data ready – Indicates transceiver has achieved power up and data
is ready.
276
PHY Diagnostics Commands
Temp Voltage Current
[C] [Volt] [mA]
----- ------- -------
48 5.15
43 5.15
Copper
Power
Output Input
[dBm] [dBm]
------
50 1.7
10 1.7
received power.
TX LOS
Fault
------ ----- ---
1.7 No No
1.7 No No
Data
Ready
-----
Yes
Yes