Dell PowerConnect 6024F Command Line Interface Reference Manual page 499
Command
line interface (cli) guide (.htm)
Hide thumbs
Also See for PowerConnect 6024F:
- User manual (474 pages) ,
- Getting started manual (66 pages) ,
- Getting started manual (154 pages)
Table of Contents
Advertisement
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays 802.1x statistics for the specified interface.
Console# show dot1x statistics ethernet g1
EapolFramesRx: 11
EapolFramesTx: 12
EapolStartFramesRx: 1
EapolLogoffFramesRx: 1
EapolRespIdFramesRx: 3
EapolRespFramesRx: 6
EapolReqIdFramesTx: 3
EapolReqFramesTx: 6
InvalidEapolFramesRx: 0
EapLengthErrorFramesRx: 0
LastEapolFrameVersion: 1
LastEapolFrameSource: 00:08:78:32:98:78
The following table describes the significant fields shown in the display:
Field
EapolFramesRx
EapolFramesTx
EapolStartFramesRx
EapolLogoffFramesRx
EapolRespIdFramesRx
EapolRespFramesRx
Description
The number of valid EAPOL frames of any type that have been
received by this Authenticator.
The number of EAPOL frames of any type that have been transmitted
by this Authenticator.
The number of EAPOL Start frames that have been received by this
Authenticator.
The number of EAPOL Logoff frames that have been received by this
Authenticator.
The number of EAP Resp/Id frames that have been received by this
Authenticator.
The number of valid EAP Response frames (other than Resp/Id
frames) that have been received by this Authenticator.
499
802.1x Commands
Advertisement
Table of Contents
