Show Ip Dvmrp Next-Hop - Dell PowerConnect 6024F Command Line Interface Reference Manual
Command
line interface (cli) guide (.htm)
Hide thumbs
Also See for PowerConnect 6024F:
- User manual (474 pages) ,
- Getting started manual (66 pages) ,
- Getting started manual (154 pages)
Table of Contents
Advertisement
The following table describes the fields shown in the display:
Field
Interface
Neighbor
Up Time
Expiry Time
Version
Capabilities
State
show ip dvmrp next-hop
The show ip dvmrp next-hop user EXEC command displays DVMRP-next-hop information on a
per-interface basis.
Syntax
show ip dvmrp next-hop [ethernet interface-number | vlan vlan-id | port-channel number]
•
ethernet interface-number—Ethernet port number.
•
vlan vlan-id—VLAN number.
•
port-channel number—Port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
226
Multicast Routing Commands
Description
Interface type, number.
The DVMRP neighbor IP address.
The time since this DVMRP neighbor became a neighbor of the local
router.
The minimum time remaining before this DVMRP neighbor is aged out.
The neighboring router DVMRP version number.
Describes the neighboring router capabilities.
L—Indicates the neighbor has only one interface with neighbors.
P—Indicates the neighbor supports pruning.
G—Indicates the neighbor sends its generation ID in Probe messages.
M—Indicates the neighbor can handle mtrace requests.
State of the neighbor adjacency. Can be One way, Active, ignoring or
down.
Advertisement
Table of Contents
