show ip ospf
The show ip ospf user EXEC command displays general OSPF routing information.
Syntax
show ip ospf
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures authentication login.
Console# show ip ospf
OSPF is enabled
OSPF Router ID 192.42.110.200
Supports only single TOS(TOS0) route
It is an area border and autonomous system boundary router
Redistributing External Routes from,
rip with metric mapped to type 2
Number of areas in this router is 3
Area 192.42.110.0
Area is a stub area with default cost 10
Number of interfaces in this area is 1
SPF algorithm executed 6 times
The following table describes the fields that display:
Field
OSPF Router ID
Supports...
252
OSPF Commands
Description
OSPF router ID.
Number of types of service supported (Type 0 only).