Show Interfaces Description - Dell PowerConnect 6024F Command Line Interface Reference Manual
Command
line interface (cli) guide (.htm)
Hide thumbs
Also See for PowerConnect 6024F:
- User manual (474 pages) ,
- Getting started manual (66 pages) ,
- Getting started manual (154 pages)
Table of Contents
Advertisement
The displayed port status information includes the following:
•
Port—The port number.
•
Description—If the port has a description, the description is displayed.
•
Port Type—The port designated IEEE shorthand identifier. For example, 1000Base-T refers to
1000 Mbps baseband signaling inluding both Tx and Rx transmissions.
•
Duplex—Displays the port Duplex status.
•
Speed—Refers to the port speed.
•
Neg—Describes the Auto-negotiation status.
•
Flow Control—Displays the Flow Control status.
•
Back Pressure—Displays the Back Pressure status.
•
Link State—Displays the Link Aggregation status.
show interfaces description
The show interfaces description user EXEC command displays the description for all configured
interfaces.
Syntax
show interfaces description [ethernet interface | port-channel port-channel-number| oob-
eth oob-interface]
•
interface—Valid Ethernet port.
•
port-channel-number—A valid port-channel trunk index.
•
oob-interface—Out-of-Band Ethernet port number.
Default Configuration
This command has no default configuration.
Command Modes
Privilege EXEC mode
User Guidelines
There are no user guidelines for this command.
142
Ethernet Configuration Commands
Advertisement
Table of Contents
