Displaying Help Information; Sftp Configuration Example - H3C S9500 Series Operation Manual

Operation Manual – SSH
H3C S9500 Series Routing Switches

2.3.6 Displaying Help Information

Use this command to display command-relevant help information such as the format of
the command, parameter configurations, and so on.
Perform the following operations in SFTP client view to display help information for
client commands:
Display help information for client commands
Note:
When editing files on an SFTP client using winscp, ensure that there are at least two
Virtual Type Terminal (VTY) user interfaces that support SSH. Otherwise, the file
editing will fail.

2.4 SFTP Configuration Example

I. Network requirements
As shown in
Switch A is used as the SFTP client;
Switch B is used as the SFTP server and its IP address is 10.111.27.91
An SFTP user is configured with the username "8040" and password "H3C".
II. Network diagram
SFTP Server
IP address 10.111.27.91
Figure 2-1 Network diagram for SFTP
III. Configuration procedure
1) Configure Switch B.
# Start the SFTP server.
To do...
Figure 2-1:
Switch B
PC
Chapter 2 SFTP Service Configuration
help [ command-name ]
Switch A
SFTP Client
2-5
Use the command...