Table of Contents
Advertisement
Configuring the management IP address of the
switch module
Obtaining and planning related data
Before configuring the management IP address of the switch module, obtain and plan the related
data, as described in
Table 18 Related data
Data
Required data
Management IP address of the OM module
User name and password used to log in to
the OM module
Slot for installing the switch module
Planned data
Data planned for the switch module
•
The data marked "default" are configured before factory delivery.
•
The data in the table is for illustration only. The actual data during on-site operations shall prevail.
Configuration mode
You can configure the management IP address of the switch module in the following modes:
•
Configure the management IP address of the switch module through the web UI of the OM
module. For details, see "Configuring the management IP address through Web UI of the OM
module."
•
Configure the management IP address of the switch module through the CLI of the OM module.
For details, see "Configuring the management IP address through the CLI of the OM module."
•
Configure the management IP address of the switch module through the CLI of the switch
module. For details, see "Configuring the management IP address through the CLI of the switch
module."
Configuring the management IP address through Web UI of
the OM module
Prerequisites
Before configuring the management IP address of the switch module through the OM module,
ensure that the following work is completed:
•
The switch module has been powered on. For details, see "Powering on the switch module."
•
For details about how to log in to the web UI of the OM module, see "Logging in to the Web UI of
the OM module."
Table
18.
Example
•
•
•
•
•
•
•
•
Management IP address (default): 192.168.100.100
Subnet mask (default): 255.255.255.0
User name (default): admin
Password (default): Password@_
Slot number: 1
IP address: 192.168.200.1
Subnet mask: 255.255.255.0
Gateway: 192.168.200.254
3
Advertisement
Table of Contents
