Dhcpv6 Relay Agent Configuration Example - 3Com S7906E Configuration Manual

DUID
DNS servers
Domain names
# You can use the display ipv6 dhcp client statistics command to view the current client statistics.
[SwitchA-Vlan-interface2] display ipv6 dhcp client statistics
Interface
Packets Received
Reply
Advertise
Reconfigure
Invalid
Packets Sent
Solicit
Request
Confirm
Renew
Rebind
Information-request
Release
Decline

DHCPv6 Relay Agent Configuration Example

Network requirements
As shown in Figure
the DHCPv6 server is 2::2/64. The DHCPv6 client and server need to communicate via a DHCPv6 relay
agent (Switch A).
Switch A acts as the gateway of network 1::/64. It sends RA messages to notify the hosts to obtain IPv6
addresses and other configuration parameters through DHCPv6.
Figure 1-6 DHCPv6 relay agent configuration
Configuration procedure
1) Configure Switch A as a DHCPv6 relay agent
: 0003000100137ff6c818
: 1:2:3::5
1:2:4::7
: abc.com
Sysname.com
: Vlan-interface2
: 1
: 1
: 0
: 0
: 0
: 5
: 0
: 0
: 0
: 0
: 0
: 5
: 0
: 0
1-6, the network address prefix of DHCPv6 clients is 1::/64, and the IPv6 address of
1-8