Configuring The Connection Mode Of An Ethernet Port; Displaying And Maintaining An Ethernet Port - 3Com S7906E Configuration Manual

Configuring the Connection Mode of an Ethernet Port

This feature is supported on the internal 10GE ports.
When configuring an OAA application, to ensure the normal communication between the device and the
OAP card, you need to set the connection mode of the 10 GE ports connecting the device and the card
to extended.
Follow these steps to configure the working mode of an Ethernet port:
To do...
Enter system view
Enter 10 GE port view
Set the connection mode of the
10 GE port

Displaying and Maintaining an Ethernet Port

To do...
Display the current state of a
port and the related information
Display the summary of a port
Display information about
discarded packets on a port
Display summary information
about discarded packets on all
ports
Clear the statistics of a port
Clear the statistics of discarded
packets on a port
Display the Combo ports and
the corresponding
optical/electrical ports
Use the command...
system-view
interface interface-type
interface-number
port connection-mode
{ extend | normal }
Use the command...
display interface
[ interface-type
[ interface-number ] ]
display brief interface
[ interface-type
[ interface-number ] ] [ | { begin
| exclude | include }
regular-expression ]
display packet-drop interface
[ interface-type
[ interface-number ] ]
display packet-drop
summary
reset counters interface
[ interface-type
[ interface-number ] ]
reset packet-drop interface
[ interface-type
[ interface-number ] ]
display port combo
1-14
Remarks
—
—
Required
Then connection mode of a 10
GE port is normal by default.
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view
Available in user view
Available in any view