Clearing Ipv6 Bgp Information; Ipv6 Bgp Configuration Examples; Ipv6 Bgp Basic Configuration - 3Com S7906E Configuration Manual

Clearing IPv6 BGP Information

To do...
Clear dampened IPv6 BGP routing
information and release suppressed
routes
Clear IPv6 BGP route flap
information

IPv6 BGP Configuration Examples

Some examples for IPv6 BGP configuration are similar to those of BGP4, so refer to BGP Configuration
in the IP Routing Volume for related information.

IPv6 BGP Basic Configuration

Network requirements
In the following figure are all IPv6 BGP switches. Between Switch A and Switch B is an eBGP
connection. Switch B, Switch C and Switch D are fully meshed through iBGP connections.
Figure 1-1 IPv6 BGP basic configuration network diagram
Configuration procedure
1) Configure IPv6 addresses for interfaces (omitted)
2) Configure iBGP connections
# Configure Switch B.
<SwitchB> system-view
[SwitchB] ipv6
[SwitchB] bgp 65009
Use the command...
reset bgp ipv6 dampening [ ipv6-address
prefix-length ]
reset bgp ipv6 flap-info
[ ipv6-address/prefix-length | as-path-acl
as-path-acl-number | regexp
as-path-regexp ]
1-21
Remarks
Available in
user view