To do...
Enter
Ethernet port
view or port
group view of
a service
provider-side
port or ports
Configure the TPID in the
service provider network
VLAN tags
Configure Outer VLAN Tag Priority
Following these steps to configure outer VLAN tag priority:
To do...
Enter system view
Create a class and enter class view
Configure the
matching
criteria
Quit to system view
Create a traffic behavior and enter
traffic behavior view
Configure the action of marking
traffic with the outer VLAN tag
priority (that is, 802.1p priority)
Quit to system view
Create a QoS policy and enter QoS
policy view
Associate the class with the traffic
behavior configured above
Quit to system view
Use the command...
Enter
interface interface-type
Ethernet
interface-number
port view
Enter
Layer-2
interface bridge-aggregation
aggregate
interface-number
interface
view
Enter port
port-group manual
group view
port-group-name
qinq ethernet-type service-tag
hex-value
system-view
traffic classifier
classifier-name [ operator
{ and | or } ]
Configure to
classify traffic
if-match customer-vlan-id
based on inner
vlan-id-list
VLAN
Configure to
classify traffic
if-match customer-dot1p
based on inner
8021p-list
VLAN tag priority
quit
traffic behavior
behavior-name
remark dot1p 8021p
quit
qos policy policy-name
classifier classifier-name
behavior behavior-name
quit
Use the command...
1-9
Remarks
Required
Use either command.
Settings made in Ethernet
interface view take effect only
on the current port.
Settings made in Layer-2
aggregate interface view take
effect
on
the
aggregate interface and the
member
ports
aggregation
corresponding to the Layer-2
aggregate interface.
Settings made in port group
view take effect on all ports in
the port group.
Optional
0x8100 by default
Remarks
—
Required
By default, the keyword and
is used.
Required
Use either command.
—
Required
Required
—
Required
Required
—
Layer-2
in
the
group