Configuring The Management Address And Its Encoding Format - 3Com S7906E Configuration Manual

S7900e family release 6600 series
Hide thumbs Also See for S7906E:
Table of Contents

Advertisement

To do...
Enter
Ethernet
interface
view or port
group view
Configure the TLVs to be
advertised

Configuring the Management Address and Its Encoding Format

LLDP encodes management addresses in numeric or character string format in management address
TLVs.
By default, management addresses are encoded in numeric format. If a neighbor encoded its
management address in character string format, you can configure the encoding format of the
management address as string on the connecting port to guarantee normal communication with the
neighbor.
Follow these steps to configure a management address to be advertised and its encoding format on one
or a group of ports:
To do...
Enter system view
Enter
Ethernet
interface
view or port
group view
Enable LLDP to advertise
management address TLVs,
and optionally, configure a
management IP address if
needed
Configure the encoding
format of the management
address to character string
Enter
Ethernet
interface interface-type interface-number
interface
view
Enter port
port-group manual port-group-name
group view
lldp tlv-enable { basic-tlv { all |
port-description | system-capability |
system-description | system-name } |
dot1-tlv { all | port-vlan-id | protocol-vlan-id
[ vlan-id ] | vlan-name [ vlan-id ] } | dot3-tlv { all
| link-aggregation | mac-physic |
max-frame-size | power } | med-tlv { all |
capability | inventory | location-id
{ civic-address device-type country-code
{ ca-type ca-value }&<1–10> | elin-address
tel-number } | network-policy |
power-over-ethernet } }
Use the command...
system-view
Enter
Ethernet
interface interface-type
interface
interface-number
view
Enter port
port-group manual
group view
port-group-name
lldp
management-address-tlv
[ ip-address ]
lldp
management-address-for
mat string
Use the command...
Required
Use either command.
Optional
By default, the management
address is sent through LLDPDUs,
and the management address is the
main IP address of the lowest-ID
VLAN carried on the interface. If
none of the carried VLANs is
assigned an IP address, no
management address will be
advertised.
Optional
By default, the management
address is encapsulated in the
numeric format.
1-9
Remarks
Required
Use either command.
Optional
By default, all types of
LLDP TLVs except
location identification
TLV are advertisable.
Remarks

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

S7910eS7906e-vS7903eS7903e-sS7902e

Table of Contents