Configuring The Vlan Operation Mode For A Uni - 3Com S7906E Configuration Manual

Table 4-1 UNI Port Basic Configuration
To do...
Enter system view
Enter ONU port view
Configure a description for a
UNI
Shut down a UNI
Configure the duplex mode for
a UNI
Enable flow control for a UNI
Configure the MDI mode for a
UNI port
Configure the port rate for a
UNI port
Enable auto-negotiation for a
UNI port
Force a UNI port to restart
auto-negotiation
When auto-negotiation is enabled on a UNI port, you cannot configure the duplex mode, MDI mode, or
rate of the UNI port.

Configuring the VLAN Operation Mode for a UNI

The VLAN operation modes for the Ethernet packets on a UNI are: transparent, tag, and translation.
Transparent mode
The transparent mode is suitable for situations where the user-end family gateway or switch is provided
and managed by the operator and the VLAN tags generated by the family gateway or switch are trusted.
In transparent mode, an ONU transparently forwards the received uplink Ethernet packets (regardless
Use the command...
system-view
interface onu
interface-number
uni uni-number description
text
uni uni-number shutdown
uni uni-number duplex { full |
half | auto }
uni uni-number flow-control
uni uni-number mdi { across |
auto | normal }
uni uni-number speed { 10 |
100 | auto }
uni uni-number
auto-negotiation
uni uni-number restart
auto-negotiation
4-2
Remarks
—
—
Optional
By default, no description is
configured for a UNI.
Optional
By default, a UNI port is
enabled.
Optional
By default, a UNI port is in the
full duplex mode.
Required
By default, flow control is
disabled for a UNI port.
Optional
Be default, the MDI mode for a
UNI port is auto.
Optional
By default, the UNI port rate is
100Mbps.
Optional
By default, auto-negotiation is
enabled on a UNI port.
Optional
This command takes effect only
when auto-negotiation is
enabled on the UNI port.