To do...
Exit to system view
Enter the interface view of the uplink
port
Set the link type of the uplink port to
trunk
Configure the uplink port to permit the
specified SVLANs to pass through
Table 1-1 Configure an uplink policy
To do...
Enter system view
Create a class and enter class
view
Specify the CVLAN for the
VLAN mapping
Exit to system view
Create a traffic behavior and
enter traffic behavior view
Specify the SVLAN for the
VLAN mapping
Exit to system view
Create a QoS policy and enter
QoS policy view
Map the CVLAN to the SVLAN
by associating the traffic class
with the traffic behavior
Exit to system view
Table 1-2 Configure a downlink policy
To do...
Enter system view
Create a class and enter class
view
Specify the SVLAN for the
VLAN mapping
Exit to system view
Create a traffic behavior and
enter traffic behavior view
Use the command...
quit
interface interface-type
interface-number
port link-type trunk
port trunk permit vlan
{ vlan-id-list | all }
Use the command...
system-view
traffic classifier tcl-name
[ operator { and | or } ]
if-match customer-vlan-id
vlan-id-value
quit
traffic behavior
behavior-name
remark service-vlan-id
vlan-id-value
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
quit
Use the command...
system-view
traffic classifier tcl-name
[ operator { and | or } ]
if-match service-vlan-id
vlan-id-value
quit
traffic behavior
behavior-name
1-8
Remarks
—
—
Required
Required
By default, a trunk port
permits only VLAN 1 to
pass through.
Remarks
—
Required
Required
—
Required
Required
—
Required
Required
—
Remarks
—
Required
Required
—
Required