3Com S7906E Configuration Manual page 567

If the available memory space of the device is insufficient, use the fixdisk command to clear the
memory or use the delete /unreserved file-url command to delete the files not in use and then perform
the following operations.
# Enter system view.
<Sysname> system-view
# Download application file newest.app from PC to Device.
Download application file newest.app from PC to the root directory of the storage medium on the
AMB of the IRF.
<Sysname> tftp 1.2.1.1 get newest.app
Download the startup file newest.app from PC to the root directories of the storage media of the
SMBs of the IRF (the member ID and slot number of the member device where one SMB resides
are both 1; the member ID and slot number of the member device where another SMB resides are
2 and 0 respectively; the member ID and slot number of the member device where the third SMB
resides are 2 and 1 respectively).
<Sysname> tftp 1.2.1.1 get newest.app chassis1#slot1#flash:/newest.app
<Sysname> tftp 1.2.1.1 get newest.app chassis2#slot0#flash:/newest.app
<Sysname> tftp 1.2.1.1 get newest.app chassis2#slot1#flash:/newest.app
# Upload a configuration file config.cfg to the TFTP server.
<Sysname> tftp 1.2.1.1 put config.cfg configback.cfg
# Specify newest.app as the main startup file to be used at the next startup for all the main boards of
the IRF.
<Sysname> boot-loader file newest.app chassis 1 slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 1 slot
0!
<Sysname> boot-loader file chassis1#slot1#flash:/newest.app chassis 1 slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 1 slot
1!
<Sysname> boot-loader file chassis2#slot0#flash:/newest.app chassis 1 slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 2 slot
0!
<Sysname> boot-loader file chassis2#slot1#flash:/newest.app chassis 1 slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 2 slot
1!
# Reboot the device and the software is upgraded.
<Sysname> reboot
2-6