the device name must contain no spaces. Otherwise, the DHCP relay agent will drop the
message.
Displaying and Maintaining DHCP Relay Agent Configuration
Display information about DHCP
server groups correlated to a specified
or all interfaces
Display Option 82 configuration
information on the DHCP relay agent
Display information about bindings of
DHCP relay agents
Display statistics information about
bindings of DHCP relay agents
Display information about the
refreshing interval for entries of
dynamic IP-to-MAC bindings
Display information about the
configuration of a specified or all
DHCP server groups
Display packet statistics on relay
agent
Clear packet statistics from relay
agent
DHCP Relay Agent Configuration Examples
DHCP Relay Agent Configuration Example
Network requirements
VLAN-interface 1 on the DHCP relay agent (Switch A) connects to the network where DHCP clients
reside. The IP address of VLAN-interface 1 is 10.10.1.1/24 and IP address of VLAN-interface 2 is
10.1.1.2/24 that communicates with the DHCP server 10.1.1.1/24. As shown in
forwards messages between DHCP clients and the DHCP server.
To do...
Use the command...
display dhcp relay { all |
interface interface-type
interface-number }
display dhcp relay information
{ all | interface interface-type
interface-number }
display dhcp relay security
[ ip-address | dynamic | static ]
display dhcp relay security
statistics
display dhcp relay security
tracker
display dhcp relay
server-group { group-id | all }
display dhcp relay statistics
[ server-group { group-id | all } ]
reset dhcp relay statistics
[ server-group group-id ]
6-9
Remarks
Available in any view
Available in user
view
Figure
6-3, Switch A