3Com S7906E Configuration Manual page 819

[SwitchA-bgp] peer 3.1.1.1 as-number 65009
[SwitchA-bgp] network 8.1.1.0 24
[SwitchA-bgp] quit
# Configure Switch B.
[SwitchB] bgp 65009
[SwitchB-bgp] router-id 2.2.2.2
[SwitchB-bgp] peer 3.1.1.2 as-number 65008
4) Configure BGP and IGP synchronization
Configure BGP to redistribute routes from OSPF on Switch B, so that Switch A can obtain the route
to 9.1.2.0/24.
Configure OSPF to redistribute routes from BGP on Switch B, so that Switch C can obtain the route
to 8.1.1.0/24.
# Configure BGP to redistribute routes from OSPF on Switch B.
[SwitchB-bgp] import-route ospf 1
[SwitchB-bgp] quit
[SwitchB] ospf 1
[SwitchB-ospf-1] import-route bgp
[SwitchB-ospf-1] quit
# Display the BGP routing table on Switch A.
[SwitchA] display bgp routing-table
Total Number of Routes: 3
BGP Local router ID is 1.1.1.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
Network
*> 3.3.3.3/32
*> 8.1.1.0/24
*> 9.1.2.0/24
# Display the routing table on Switch C.
[SwitchC] display ip routing-table
Routing Tables: Public
Destinations : 9
Destination/Mask Proto
2.2.2.2/32 OSPF
3.3.3.3/32 Direct 0
8.1.1.0/24 O_ASE
9.1.1.0/24 Direct 0
9.1.1.2/32 Direct 0
9.1.2.0/24 Direct 0
9.1.2.1/32 Direct 0
127.0.0.0/8 Direct 0
127.0.0.1/32 Direct 0
5) Verification
# Use ping for verification.
i - internal, s - suppressed, S - Stale
NextHop MED
3.1.1.1 1
0.0.0.0 0
3.1.1.1 1
Routes : 9
Pre Cost
10 1
0
150 1
0
0
0
0
0
0
1-50
LocPrf PrefVal Path/Ogn
0
0
0
NextHop Interface
9.1.1.1 Vlan300
127.0.0.1 InLoop0
9.1.1.1 Vlan300
9.1.1.2 Vlan300
127.0.0.1 InLoop0
9.1.2.1 Vlan400
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1 InLoop0
65009?
i
65009?