3Com S7906E Configuration Manual page 241

S7900e family release 6600 series
Hide thumbs Also See for S7906E:
Table of Contents

Advertisement

[SwitchA-behavior-b11] traffic behavior b22
[SwitchA-behavior-b22] remark customer-vlan-id 2
[SwitchA-behavior-b22] traffic behavior b33
[SwitchA-behavior-b33] remark customer-vlan-id 3
[SwitchA-behavior-b33] quit
[SwitchA] qos policy p11
[SwitchA-policy-p11] classifier c11 behavior b11
[SwitchA-policy-p11] classifier c22 behavior b22
[SwitchA-policy-p11] classifier c33 behavior b33
[SwitchA-policy-p11] quit
[SwitchA] qos policy p22
[SwitchA-policy-p22] classifier c44 behavior b11
[SwitchA-policy-p22] classifier c55 behavior b22
[SwitchA-policy-p22] classifier c66 behavior b33
[SwitchA-policy-p22] quit
# Configure GigabitEthernet 2/0/1 to permit frames of the specified CVLANs and SVLANs to pass
through.
[SwitchA] interface gigabitethernet 2/0/1
[SwitchA-GigabitEthernet2/0/1] port link-type trunk
[SwitchA-GigabitEthernet2/0/1] port trunk permit vlan 1 2 3 101 201 301
# Enable basic QinQ on GigabitEthernet 2/0/1.
[SwitchA-GigabitEthernet2/0/1] qinq enable
# Apply the uplink policy p1 to the inbound direction of GigabitEthernet 2/0/1.
[SwitchA-GigabitEthernet2/0/1] qos apply policy p1 inbound
# Apply the downlink policy p11 to the outbound direction of GigabitEthernet 2/0/1.
[SwitchA-GigabitEthernet2/0/1] qos apply policy p11 outbound
[SwitchA-GigabitEthernet2/0/1] quit
# Configure GigabitEthernet 2/0/2 to permit frames of the specified CVLANs and SVLANs to pass
through.
[SwitchA] interface gigabitethernet 2/0/2
[SwitchA-GigabitEthernet2/0/2] port link-type trunk
[SwitchA-GigabitEthernet2/0/2] port trunk permit vlan 1 2 3 102 202 302
# Enable basic QinQ on GigabitEthernet 2/0/2.
[SwitchA-GigabitEthernet2/0/2] qinq enable
# Apply the uplink policy p2 to the inbound direction of GigabitEthernet 2/0/2.
[SwitchA-GigabitEthernet2/0/2] qos apply policy p2 inbound
# Apply the downlink policy p22 to the outbound direction of GigabitEthernet 2/0/2.
[SwitchA-GigabitEthernet2/0/2] qos apply policy p22 outbound
[SwitchA-GigabitEthernet2/0/2] quit
# Configure GigabitEthernet 2/0/3 to permit frames of the specified SVLANs to pass through.
[SwitchA] interface gigabitethernet 2/0/3
[SwitchA-GigabitEthernet2/0/3] port link-type trunk
1-18

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

S7910eS7906e-vS7903eS7903e-sS7902e

Table of Contents