2
IPv6 DNS Configuration
EA boards (such as LSQ1GP12EA and LSQ1TGX1EA) do not support IPv6 features.
Introduction to IPv6 DNS
IPv6 DNS is responsible for translating domain names into IPv6 addresses. Similar to IPv4 DNS, IPv6
DNS involves static domain name resolution and dynamic domain name resolution. The functions and
implementations of the two types of domain name resolution are the same as those of IPv4 DNS. For
details, refer to
IPv4 DNS
Configuring the IPv6 DNS Client
Configuring Static Domain Name Resolution
Configuring static domain name resolution refers to specifying the mappings between host names and
IPv6 addresses. Static domain name resolution allows applications such as Telnet to contact hosts by
using host names instead of IPv6 addresses.
Follow these steps to configure static domain name resolution:
To do...
Enter system view
Configure a mapping between a
host name and an IPv6 address
A host name can be mapped to one IPv6 address only. If you map a host name to different IPv6
addresses, the last configuration takes effect.
You can configure up to 50 mappings between domain name and IPv6 address.
Configuring Dynamic Domain Name Resolution
To send DNS queries to a correct server for resolution, dynamic domain name resolution needs to be
enabled and a DNS server needs to be configured.
Configuration.
Use the command...
system-view
ipv6 host hostname ipv6-address
2-1
Remarks
—
Required
Not configured by
default.