3Com S7906E Configuration Manual page 434

To do...
Configure the
padding format
for Option 82
Configure the
Configure
code type for the
non-user-defined
circuit ID
Option 82
sub-option
Configure the
code type for the
remote ID
sub-option
Configure the
padding content
for the circuit ID
sub-option
Configure
user-defined
Option 82
Configure the
padding content
for the remote ID
sub-option
Use the command...
dhcp-snooping information format
{ normal | verbose [ node-identifier
{ mac | sysname | user-defined
node-identifier } ] }
dhcp-snooping information
circuit-id format-type { ascii | hex }
dhcp-snooping information
remote-id format-type { ascii | hex }
dhcp-snooping information [ vlan
vlan-id ] circuit-id string circuit-id
dhcp-snooping information [ vlan
vlan-id ] remote-id string { remote-id
| sysname }
5-6
Remarks
Optional
normal by default.
You can specify the
padding format as
normal for Option
82 on ONU port
only.
Optional
By default, the code
type depends on the
padding format of
Option 82. Each
field has its own
code type.
This code type
configuration
applies to
non-user-defined
Option 82 only.
Optional
hex by default.
The code type
configuration
applies to
non-user-defined
Option 82 only.
Optional
By default, the
padding content
depends on the
padding format of
Option 82.
Optional
By default, the
padding content
depends on the
padding format of
Option 82.