Displaying And Maintaining Ipv6 Dns - 3Com S7906E Configuration Manual

In addition, you can configure a DNS suffix that the system will automatically add to the provided
domain name for resolution.
Follow these steps to configure dynamic domain name resolution:
To do...
Enter system view
Enable dynamic domain
name resolution
Specify a DNS server
Configure a DNS suffix
The dns resolve and dns domain commands are the same as those of IPv4 DNS.
You can configure up to six DNS servers, including those with IPv4 addresses.
You can specify up to ten DNS suffixes.

Displaying and Maintaining IPv6 DNS

To do...
Display the static IPv6 domain name
resolution table
Display IPv6 DNS server information
Display DNS suffixes
Display the information of dynamic
IPv6 domain name cache
Clear the information of dynamic
IPv6 domain name cache
Use the command...
system-view
dns resolve
dns server ipv6 ipv6-address
[ interface-type interface-number ]
dns domain domain-name
Use the command...
display ipv6 host
display dns ipv6 server
[ dynamic ]
display dns domain [ dynamic ]
display dns ipv6 dynamic-host
reset dns ipv6 dynamic-host
2-2
Remarks
—
Required
Disabled by default.
Required
Not specified by default.
If the IPv6 address of a DNS server
is a link-local address, you need to
specify the interface-type and
interface-number arguments.
Required
Not configured by default, that is,
only the provided domain name is
resolved.
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view