To do...
Enter system view
Enter BGP view
Enable route redistribution from
a routing protocol into BGP
Enabling Default Route Redistribution into BGP
Using the import-route command cannot redistribute a default route. To do so, complete the following
configuration.
Follow these steps to enable default route redistribution into BGP:
To do...
Enter system view
Enter BGP view
Enable route redistribution from
a routing protocol into BGP
Enable default route
redistribution into BGP
Controlling Route Distribution and Reception
Prerequisites
BGP connections have been created.
Configuring BGP Route Summarization
To reduce the routing table size on medium and large BGP networks, you need to configure route
summarization on BGP routers. BGP supports two summarization modes: automatic and manual.
Manual summary routes enjoy a higher priority than automatic ones.
Configure automatic route summarization
After automatic route summarization is configured, BGP summarizes redistributed IGP subnets to
advertise only natural networks. Routes injected with the network command can not be summarized.
Follow these steps to configure automatic route summarization:
To do...
Enter system view
Enter BGP view
Use the command...
system-view
bgp as-number
import-route protocol
[ process-id | all-processes ]
[ med med-value |
route-policy
route-policy-name ] *
Use the command...
system-view
bgp as-number
import-route protocol
[ process-id | all-processes ]
[ med med-value |
route-policy
route-policy-name ] *
default-route imported
Use the command...
system-view
bgp as-number
1-21
Remarks
—
—
Required
Not enabled by default
Remarks
—
—
Required
Not redistributed by default
Optional
Not enabled by default
Remarks
—
—