ONU update configuration
Follow these steps to update all the ONUs of the specified type:
To do...
Enter system view
Enter FTTH view
Update all the ONUs of the
specified type under the switch
After you configure the updating of all the ONUs of the specified type under the switch, if the ONU
corresponding to a newly created ONU port is of the specified type and goes online, the switch will
update it automatically.
The update configuration performed in port view takes precedence over that in FTTH view. For
example, assume the ONU corresponding to ONU port ONU 3/0/1:1 is of type A. If you configure
the update file for type-A ONUs as 1.app in FTTH view and configure the update file as 2.app in
ONU 3/0/1:1 port view, 2.app will be used to update the ONU. If you cancel the port-level
configuration, the update by-type configuration is not executed until the ONU is registered
successfully next time and the corresponding port is brought up.
An OLT can update up to 64 types of ONUs at the same time, that is, you can specify update files
for up to 64 types of ONUs with the update onu onu-type onu-type filename file-url command
multiple times.
Follow these steps to update one ONU:
To do...
Enter system view
Enter ONU port view
Use the update command on
the ONU port
Follow these steps to update all the ONUs under the specified OLT port:
To do...
Enter system view
Enter OLT port view
Use the update command on all
the created ONU ports under
the OLT port
Use the command...
system-view
ftth
update onu onu-type
onu-type filename file-url
Use the command...
system-view
interface onu
interface-number
update onu filename file-url
Use the command...
system-view
interface olt interface-number
update onu filename file-url
3-17
Remarks
—
—
Required
Remarks
—
—
Required
Remarks
—
—
Required