To do...
Display the registration and
deregistration information of an
ONU
Display all the configuration
information
Display the configuration
information in the current view
To display the information about an ONU, make sure the ONU is online. You can use the display
onuinfo command to check whether an ONU is online.
Port statistics data includes average error rate of data bits and data frames transmitted between an
OLT and the ONUs. For detailed information, refer to the command manual.
OLT Configuration Examples
OLT Port Isolation Configuration Example
Network requirements
An OLT device is connected to the Internet through the uplink port.
Configure port isolation between OLT 3/0/1 and OLT 3/0/2 so that the users under OLT 3/0/1 and
those under OLT 3/0/2 can access the Internet but cannot communicate with each other at Layer 2.
Network diagram
Figure 2-1 Network diagram for OLT port isolation
Use the command...
display onu-event interface
interface-type interface-number
display current-configuration
display this
2-8
Remarks