3Com S7906E Configuration Manual page 574

IP Routing Volume Organization
Manual Version
20091015-C-1.00
Product Version
Release 6605 and Later
Organization
The IP Routing Volume is organized as follows:
Features
IP Routing Basics
Static Routing
RIP
OSPF
This document describes:
Introduction to IP routing and routing table
Routing protocol overview
A static route is manually configured by the administrator. The proper
configuration and usage of static routes can improve network
performance and ensure bandwidth for important network applications.
This document describes:
Static route configuration
Detecting Reachability of the Static Route's Nexthop
Routing Information Protocol (RIP) is a simple Interior Gateway Protocol
(IGP), mainly used in small-sized networks. This document describes:
RIP basic functions configuration
RIP advanced functions configuration
RIP network optimization configuration
Open Shortest Path First (OSPF) is an Interior Gateway Protocol based
on the link state developed by IETF. This document describes:
Enabling OSPF
Configuring OSPF Areas
Configuring OSPF Network Types
Configuring OSPF Route Control
Configuring OSPF Sham Link
Configuring OSPF Network Optimization
Configuring OSPF Graceful Restart
Description