3
ONU Remote Management Configuration
When an S7900E switch is working as an OLT device, you can configure a variety of functions on its
ONU ports so that you can manage the connected ONUs remotely. This chapter describes only the
functions and commands developed specially for ONU ports on such an S7900E switch. Other function
configurations of ONU ports are basically the same as those of the Ethernet ports on an S7900E switch.
For details, see
ONU Configuration
Currently, the H3C ONUs for the S7900E series switches fall into three types:
ET704 series ONUs (For details, see H3C ET704 Series EPON ONUs User Manual.)
S3100 series ONUs (For details, see H3C S3100 Series Ethernet Switches Quick Start.)
EC series ONUs (For details, see H3C EC1001 Video Encoder User Manual.)
Support for OLT remote management commands varies with ONUs. For details, see the sections
describing the supported configuration functions in ONU device user manuals. The following table lists
the ONU remote management functions supported by an S7900E switch working as an OLT device.
ONU Configuration Task List
Complete the following tasks to configure an ONU:
Creating an ONU Port
Binding an ONU with an ONU Port
Configuring Batch ONU Binding and Automatic ONU Binding
Configuring the Management VLAN of the ONU
Configure the ONU Bandwidth Allocation and Related Parameters
Enabling Related Protocols on an ONU
Configuring the Multicast Mode of the ONU
Configuring the Link Type of an ONU Port
Other ONU
ONU Port Features and
Task
Enabling FEC
Restrictions.
3-1
Remarks
Required
Required
Optional
Optional
For H3C ONUs only
Optional
For H3C ONUs only
Optional
For H3C ONUs only
Optional
Optional
Optional