3Com S7906E Configuration Manual page 552

User(10.1.1.1:(none)):abc
331 Give me your password, please
Password:
230 Logged in successfully
# Set the file transfer mode to binary.
[ftp] binary
200 Type set to I.
# Download the startup file newest.app from PC to Device.
Download the startup file newest.app from PC to the root directory of the storage medium on the
AMB.
[ftp] get newest.app
Download the startup file newest.app from PC to the root directory of the storage medium on the
SMB (in slot 1).
[ftp] get newest.app slot1#flash:/newest.app
# Upload the configuration file config.cfg of Device to the server for backup.
[ftp] ascii
200 Type set to A.
[ftp] put config.cfg back-config.cfg
227 Entering Passive Mode (10,1,1,1,4,2).
125 ASCII mode data connection already open, transfer starting for /config.cfg.
226 Transfer complete.
FTP: 3494 byte(s) sent in 5.646 second(s), 618.00 byte(s)/sec.
[ftp] bye
# Specify newest.app as the main startup file to be used at the next startup.
Specify newest.app as the main startup file to be used at the next startup for the AMB.
<Sysname> boot-loader file newest.app slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 0!
Specify newest.app as the main startup file to be used at the next startup for the SMB (in slot 1).
<Sysname> boot-loader file slot1#flash:/newest.app slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
# Reboot the device, and the startup file is updated at the system reboot.
<Sysname> reboot
The startup file used for the next startup must be saved under the root directory of the storage medium.
You can copy or move a file to the root directory of the storage medium. For the details of the
boot-loader command, refer to Device Management Commands in the System Volume.
1-8