3Com S7906E Configuration Manual page 592

127.0.0.1/32
# Display the IP routing table of Switch B.
[SwitchB] display ip routing-table
Routing Tables: Public
Destinations : 10
Destination/Mask
1.1.2.0/24
1.1.3.0/24
1.1.4.0/30
1.1.4.2/32
1.1.5.4/30
1.1.5.5/32
127.0.0.0/8
127.0.0.1/32
1.1.6.0/24
1.1.6.1/32
# Use the ping command on Host B to check reachability to Host A, assuming Windows XP runs on the
two hosts.
C:\Documents and Settings\Administrator>ping 1.1.2.2
Pinging 1.1.2.2 with 32 bytes of data:
Reply from 1.1.2.2: bytes=32 time=1ms TTL=255
Reply from 1.1.2.2: bytes=32 time=1ms TTL=255
Reply from 1.1.2.2: bytes=32 time=1ms TTL=255
Reply from 1.1.2.2: bytes=32 time=1ms TTL=255
Ping statistics for 1.1.2.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1ms
# Use the tracert command on Host B to check reachability to Host A.
[HostB] tracert 1.1.2.2
Tracing route to 1.1.2.2 over a maximum of 30 hops
1 <1 ms <1 ms
2 <1 ms <1 ms
3 1 ms <1 ms
Trace complete.
Direct 0 0
Routes : 10
Proto Pre Cost
Static 60 0
Static 60 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
<1 ms 1.1.6.1
<1 ms 1.1.4.1
<1 ms 1.1.2.2
127.0.0.1
NextHop
1.1.4.1
1.1.5.6
1.1.4.2
127.0.0.1
1.1.5.5
127.0.0.1
127.0.0.1
127.0.0.1
1.1.6.1
127.0.0.1
1-7
InLoop0
Interface
Vlan500
Vlan600
Vlan500
InLoop0
Vlan600
InLoop0
InLoop0
InLoop0
Vlan100
InLoop0