Is-Is Configuration Example; Is-Is Basic Configuration - 3Com S7906E Configuration Manual

To do...
Display IS-IS LSDB information
Display IS-IS mesh group
information
Display the
host-name-to-system-ID
mapping table
Display IS-IS neighbor
information
Display IS-IS IPv4 routing
information
Display IS-IS SPF calculation
log information
Display IS-IS statistics
Clear ISIS process data
structure information
Clear the data structure
information of an IS-IS
neighbor

IS-IS Configuration Example

IS-IS Basic Configuration

Network requirements
As shown in Figure
switches, Switch D is a Level-2 switch and Switch C is a Level-1-2 switch. Switch A, B and C are in Area
10, while Switch D is in Area 20.
display isis lsdb [ [ l1 | l2 | level-1 | level-2 ] |
[ lsp-id lspid | lsp-name lspname ] | local |
verbose ] * [ process-id | vpn-instance
vpn-instance-name ]
display isis mesh-group [ process-id |
vpn-instance vpn-instance-name ]
display isis name-table [ process-id |
vpn-instance vpn-instance-name ]
display isis peer [ statistics | verbose ]
[ process-id | vpn-instance
vpn-instance-name ]
display isis route [ ipv4 ] [ [ level-1 | level-2 ]
| verbose ] * [ process-id | vpn-instance
vpn-instance-name ]
display isis spf-log [ process-id |
vpn-instance vpn-instance-name ]
display isis statistics [ level-1 | level-1-2 |
level-2 ] [ process-id | vpn-instance
vpn-instance-name ]
reset isis all [ process-id | vpn-instance
vpn-instance-name ]
reset isis peer system-id [ process-id |
vpn-instance vpn-instance-name ]
1-15, Switch A, B, C and Switch D reside in an IS-IS AS. Switch A and B are Level-1
Use the command...
1-36
Remarks
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in user
view
Available in user
view