Manual Voice Vlan Assignment Mode Configuration Example - 3Com S7906E Configuration Manual

[DeviceA-GigabitEthernet2/0/1] voice vlan 2 enable
[DeviceA-GigabitEthernet2/0/1] quit
# Configure GigabitEthernet 2/0/2.
[DeviceA] interface gigabitethernet 2/0/2
[DeviceA-GigabitEthernet2/0/2] voice vlan mode auto
[DeviceA-GigabitEthernet2/0/2] port link-type hybrid
[DeviceA-GigabitEthernet2/0/2] voice vlan 3 enable
Verification
# Display the OUI addresses, OUI address masks, and description strings supported currently.
<DeviceA> display voice vlan oui
Oui Address
0001-e300-0000
0003-6b00-0000
0004-0d00-0000
0011-1100-0000
0011-2200-0000
00d0-1e00-0000
0060-b900-0000
00e0-7500-0000
00e0-bb00-0000
# Display the current states of voice VLANs.
<DeviceA> display voice vlan state
Maximum of Voice VLANs: 128
Current Voice VLANs: 2
Voice VLAN security mode: Security
Voice VLAN aging time: 30 minutes
Voice VLAN enabled port and its mode:
PORT
--------------------------------------------------------------------
GigabitEthernet2/0/1
GigabitEthernet2/0/2

Manual Voice VLAN Assignment Mode Configuration Example

Network requirements
Create VLAN 2 and configure it as a voice VLAN permitting only voice traffic to pass through.
The IP phones send untagged voice traffic. Configure GigabitEthernet 2/0/1 as a hybrid port.
Configure GigabitEthernet 2/0/1 to operate in manual voice VLAN assignment mode. Configure
GigabitEthernet 2/0/1 to allow voice traffic with an OUI address of 0011-2200-0000, a mask of
ffff-ff00-0000, and a description string test to be forwarded through the voice VLAN.
Mask Description
ffff-ff00-0000 Siemens phone
ffff-ff00-0000 Cisco phone
ffff-ff00-0000 Avaya phone
ffff-ff00-0000 IP phone A
ffff-ff00-0000 IP phone B
ffff-ff00-0000 Pingtel phone
ffff-ff00-0000 Philips/NEC phone
ffff-ff00-0000 Polycom phone
ffff-ff00-0000 3com phone
VLAN
2
3
MODE COS
AUTO 6
AUTO 6
4-9
DSCP
46
46