Operating The Directories On An Ftp Server - 3Com S7906E Configuration Manual

To do...
Log in to the remote FTP server
directly in user view
Log in to the remote FTP server
indirectly in FTP client view
If no primary IP address is configured on the specified source interface, no FTP connection can be
established.
If you use the ftp client source command to first configure the source interface and then the
source IP address of the transmitted packets, the newly configured source IP address will take
effect instead of the current source interface, and vice versa.
Follow these steps to establish an FTP connection (In IPv6 networking):
To do...
Log in to the remote FTP server
directly in user view
Log in to the remote FTP server
indirectly in FTP client view

Operating the Directories on an FTP Server

After the device serving as the FTP client has established a connection with an FTP server (For how to
establish an FTP connection, refer to
folders under the authorized directory of the FTP server.
Follow these steps to operate the directories on an FTP server:
Display detailed information about a directory
or file on the remote FTP server
Query a directory or file on the remote FTP
server
Change the working directory of the remote
FTP server
Use the command...
ftp [ server-address [ service-port ]
[ source { interface interface-type
interface-number | ip
source-ip-address } ] ]
ftp
open server-address [ service-port ]
Use the command...
ftp ipv6 [ server-address
[ service-port ] [ source ipv6
source-ipv6-address ] [ -i
interface-type
interface-number ] ]
ftp ipv6
open ipv6 server-address
[ service-port ] [ -i interface-type
interface-number ]
Establishing an FTP
To do...
Use either approach.
The ftp ipv6 command is
available in user view; and the
open ipv6 command is
available in FTP client view.
Connection.), you can create or delete
Use the command...
dir [ remotefile [ localfile ] ]
ls [ remotefile [ localfile ] ]
cd { directory | .. | / }
1-4
Remarks
Use either approach.
The ftp command is
available in user view; and
the open command is
available in FTP client
view.
Remarks
Remarks
Optional
Optional
Optional