3Com S7906E Configuration Manual page 933

To do...
Enter system view
Enter route policy node view
Set the AS-PATH attribute for
BGP routing information
Delete the community attribute
of BGP routing information using
the community list
Set the community attribute for
BGP routing information
Set a cost for routing information
Set a cost type for routing
information
Set the extended community
attribute for BGP routing
for IPv4 routes
Set the next
hop
for IPv6 routes
Inject routing information to a
specified ISIS level
Set the local preference for BGP
routing information
Set MPLS label
Set the origin attribute for BGP
routing information
Set the preference for the
routing protocol
Use the command...
system-view
route-policy route-policy-name
{ deny | permit } node
node-number
apply as-path
as-number&<1-10> [ replace ]
apply comm-list
comm-list-number delete
apply community { none |
additive |
{ community-number&<1-16> |
aa:nn&<1-16> | internet |
no-export-subconfed |
no-export | no-advertise } *
[ additive ] }
apply cost [ + | - ] value
apply cost-type [ external |
internal | type-1 | type-2 ]
apply extcommunity { rt
{ as-number:nn |
ip-address:nn } }&<1-16>
[ additive ]
apply ip-address next-hop
ip-address
apply ipv6 next-hop
ipv6-address
apply isis { level-1 | level-1-2 |
level-2 }
apply local-preference
preference
apply mpls-label
apply origin { egp as-number |
igp | incomplete }
apply preference preference
1-9
Remarks
—
Required
Not created by default.
Optional
Not set by default.
Optional
Not configured by default.
Optional
Not set by default.
Optional
Not set by default.
Optional
Not set by default.
Optional
Not set by default.
Optional
Not set by default.
The setting does not apply to
redistributed routing
information.
Optional
Not set by default.
The setting does not apply to
redistributed routing
information.
Optional
Not configured by default.
Optional
Not set by default.
Optional
Not set by default.
Optional
Not set by default.
Optional
Not set by default.