Configuring And Displaying Clients' Ip-To-Mac Bindings; Dhcp Relay Agent Configuration Example - 3Com Baseline 2928 PWR Plus User Manual

Configuring and Displaying Clients' IP-to-MAC Bindings

Select Network > DHCP from the navigation tree to enter the default DHCP Relay page shown in
Figure 2-3. In the User Information field, click the User Information button to view static and dynamic
bindings, as shown in
Figure 2-6 Display clients' IP-to-MAC bindings
Figure 2-7 Create a static IP-to-MAC binding
Table 2-4 describes static IP-to-MAC binding configuration items.
Table 2-4 Static IP-to-MAC binding configuration items
Item
IP Address
MAC Address
Interface Name
Return to DHCP Relay Agent Configuration Task

DHCP Relay Agent Configuration Example

Network requirements
As shown in Figure
where DHCP clients reside. The IP address of VLAN-interface 1 is 10.10.1.1/24 and the IP address of
Figure 2-6. Click Add to enter the page shown in
Type the IP address of a DHCP client.
Type the MAC address of the DHCP client.
Select the Layer 3 interface connected with the DHCP client.
The interface of a static binding entry must be configured as a DHCP
relay agent; otherwise, address entry conflicts may occur.
2-8, VLAN-interface 1 on the DHCP relay agent (Switch A) connects to the network
Description
List.
2-6
Figure 2-7.