3Com S7906E Configuration Manual page 237

To do...
Create a class and enter class
view
Specify the original CVLAN for
the VLAN mapping
Specify the new SVLAN for the
VLAN mapping
Exit to system view
Create a traffic behavior and
enter traffic behavior view
Specify the new CVLAN used
for replacing the original
CVLAN
Exit to system view
Create a QoS policy and enter
QoS policy view
Map the original CVLAN and
the new SVLAN to the new
CVLAN by associating the
traffic class with the traffic
behavior
Exit to system view
Table 1-6 Configure an uplink policy for the downlink port
To do...
Enter system view
Create a class and enter class
view
Specify the original CVLAN for
the VLAN mapping
Specify the original SVLAN for
the VLAN mapping
Exit to system view
Create a traffic behavior and
enter traffic behavior view
Specify the new SVLAN used
for replacing the original
SVLAN
Exit to system view
Create a QoS policy and enter
QoS policy view
Use the command...
traffic classifier tcl-name
[ operator { and | or } ]
if-match customer-vlan-id
vlan-id-value
if-match service-vlan-id
vlan-id-value
quit
traffic behavior
behavior-name
remark customer-vlan-id
vlan-id-value
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
quit
Use the command...
system-view
traffic classifier tcl-name
[ operator { and | or } ]
if-match customer-vlan-id
vlan-id-value
if-match service-vlan-id
vlan-id-value
quit
traffic behavior
behavior-name
remark service-vlan-id
vlan-id-value
quit
qos policy policy-name
1-14
Remarks
Required
Required
Required
—
Required
Required
—
Required
Required
—
Remarks
—
Required
Required
Required
—
Required
Required
—
Required