Enabling/Disabling Ftp Server; Configuring The Ftp Server Authentication And Authorization; Configuring The Running Parameters Of Ftp Server - 3Com Switch 4500 26-Port Configuration Manual

232 C 12: F S
HAPTER ILE
Enabling/Disabling FTP
Server
Configuring the FTP
Server Authentication
and Authorization
Configuring the Running
Parameters of FTP Server
M
YSTEM ANAGEMENT
Device Configuration
PC Log into the Switch from FTP client.
The prerequisite for normal FTP function is that the Switch and PC are reachable.
You can use the following commands to enable/disable the FTP server on the
Switch. Perform the following configuration in System View.
Table 252 Enable/Disable FTP Server
Operation
Enable the FTP server
Disable the FTP server
FTP server supports multiple users to access at the same time. A remote FTP client
sends request to the FTP server. Then, the FTP server will carry out the
corresponding operation and return the result to the client.
By default, FTP server is disabled.
You can use the following commands to configure FTP server authentication and
authorization. The authorization information of FTP server includes the top
working directory provided for FTP clients.
Perform the following configuration in the corresponding view.
Table 253 Configure the FTP Server Authentication and Authorization
Operation
Create new local user and enter local User View
(System View)
Delete local user (System View)
Configure password for local user (Local User
View)
Configure service type for local user (Local User
View)
Cancel password for local user (Local User View) undo password
Cancel service type for local user (Local User
View)
Only the clients who have passed the authentication and authorization
successfully can access the FTP server.
You can use the following commands to configure the connection timeout of the
FTP server. If the FTP server receives no service request from the FTP client for a
period of time, it will cut the connection to it, thereby avoiding the illegal access
from the unauthorized users. The period of time is FTP connection timeout.
Perform the following configuration in System View.
Default
-
Command
ftp server enable
undo ftp server
Command
local-user username
undo local-user [ username |
all [ service-type ftp ] ]
password [ cipher | simple ]
password
service-type ftp ftp-directory
directory
undo service-type ftp [
ftp-directory ]
Description
-