Ftp Test - 3Com 4200G 12-Port Configuration Manual

remote-ping entry(admin administrator, tag dhcp) test result:
Send operation times: 10
Min/Max/Average Round Trip Time: 1018/1037/1023
Square-Sum of Round Trip Time: 10465630
Last complete test time: 2000-4-3 9:51:30.9
Extend result:
SD Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0
System busy operation number: 0
Operation sequence errors: 0
Other operation errors: 0
[Sysname-remote-ping-administrator-dhcp] display remote-ping history administrator dhcp
remote-ping entry(admin administrator, tag dhcp) history record:
Index Response
1
2
3
4
5
6
7
8
9
10
For detailed output description, see the corresponding command manual.
You can perform a remote-ping DHCP test only when no DHCP client is enabled on any interface.
Otherwise, the DHCP Server sends the response to an interface enabled with the DHCP Client rather
than to the source interface, thus resulting in remote-ping DHCP test failure.

FTP Test

Network requirements
Both the remote-ping client and the FTP server are 4200G Ethernet switches. Perform a remote-ping
FTP test between the two switches to test the connectivity to the specified FTP server and the time
required to upload a file to the server after the connection is established. Both the username and
password used to log in to the FTP server are admin. The file to be uploaded to the server is
cmdtree.txt.
Status LastRC
1018 1
1037 1
1024 1
1027 1
1018 1
1020 1
1018 1
1020 1
1020 1
1028 1
Receive response times: 10
DS Maximal delay: 0
Operation timeout number: 0
Connection fail number: 0
Drop operation number: 0
Time
0 2000-04-03 09:51:30.9
0 2000-04-03 09:51:22.9
0 2000-04-03 09:51:18.9
0 2000-04-03 09:51:06.8
0 2000-04-03 09:51:00.8
0 2000-04-03 09:50:52.8
0 2000-04-03 09:50:48.8
0 2000-04-03 09:50:36.8
0 2000-04-03 09:50:30.8
0 2000-04-03 09:50:22.8
1-18