Configuring The Ftp Server Authentication And Authorization; Configuring The Running Parameters Of Ftp Server - 3Com 5500-SI Configuration Manual

Configuring the FTP
Server Authentication
and Authorization
Configuring the Running
Parameters of FTP Server
Table 487 Configure source IP address for FTP Server and Client (continued)
Operation
Use a specified source interface to
establish a connection with an FTP
server
Specify source IP address for the FTP
client
Specify source interface for the FTP
client
If the ip-addr in the command is not an address of the device, your configuration fails.
If you specify a non-existent interface in the command, your configuration fails.
You can use the following commands to configure FTP server authentication and
authorization. The authorization information of FTP server includes the top working
directory provided for FTP clients.
Perform the following configuration in the corresponding view.
Table 488 Configure the FTP Server Authentication and Authorization
Operation
Create new local user and enter local User View
(System View)
Delete local user (System View)
Configure password for local user (Local User View)
Configure service type for local user (Local User
View)
Cancel password for local user (Local User View)
Cancel service type for local user (Local User View)
Set the password displaymode of local users
Only the clients who have passed the authentication and authorization successfully
can access the FTP server.
You can use the following commands to configure the connection timeout of the FTP
server. If the FTP server receives no service request from the FTP client for a period of
time, it will cut the connection to it, thereby avoiding the illegal access from the
unauthorized users. The period of time is FTP connection timeout.
Perform the following configuration in System View.
Table 489 Configure FTP Server Connection Timeout
Operation
Configure FTP server connection timeouts
Restoring the default FTP server connection timeouts
By default, the FTP server connection timeout is 30 minutes.
Command
ftp { cluster | remote-server }
source-interface interface-type
interface-number
ftp source-ip ip-addr
ftp source-interface interface-type
interface-number
Command
local-user username
undo local-user [ username |
all [ service-type ftp ] ]
password [ cipher | simple ]
password
service-type ftp ftp-directory
directory
undo password
undo service-type ftp [
ftp-directory ]
local-user-password-display-mo
de [ auto | cipher-force ]
Command
ftp timeout minute
undo ftp timeout
FTP Overview 445
Remarks
Optional
Optional
Optional