Configuring Ipv6 Static Multicast Mac Address Entries - 3Com S7906E Configuration Manual

Configuring IPv6 Static Multicast MAC Address Entries

In Layer-2 multicast, a Layer-2 IPv6 multicast protocol (such as MLD snooping) can dynamically add
IPv6 multicast MAC address entries. Or, you can manually configure IPv6 multicast MAC address
entries.
Configuring an IPv6 static multicast MAC address entry in system view
Table 1-1 Configure an IPv6 static multicast MAC address entry in system view
To do...
Enter system view
Configure a static multicast
MAC address entry
Configuring an IPv6 static multicast MAC address entry in interface view
Table 1-2 Configure an IPv6 static multicast MAC address entry in interface view
To do...
Enter system view
Enter Ethernet interface/Layer
2 aggregate interface view or
port group view
Configure a static multicast
MAC address entry
For details about the mac-address multicast command, refer to Multicast Routing and
Forwarding Commands in the IP Multicast Volume.
When configuring a static multicast MAC address entry in system view, the configuration is
effective for the specified interface. When configuring a static multicast MAC address entry in
interface view or port group view, the configuration is effective only for the current interface or
interfaces in the current port group.
Any legal IPv6 multicast MAC address except 3333-xxxx-xxxx (with x representing a hexadecimal
number from 0 to F) can be manually added to the MAC address table.
Use the command...
system-view
mac-address multicast
mac-address interface
interface-list vlan vlan-id
Use the command...
system-view
interface interface-type
interface-number
mac-address multicast
mac-address vlan vlan-id
1-7
Remarks
—
Required
No static multicast MAC
address entries exist by default.
Remarks
—
Required
Configurations performed in
Ethernet interface view or
Layer 2 aggregate interface
view take effect for only the
current interface; while that
performed in port group view
take effect for all ports in the
port group.
Required
No static multicast MAC
address entries exist by default.